ADTRAN IQ 710 System Manual page 216

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 216
ISDN Options
1. Press
<Escape>
Select option 5, ISDN O
played. The default values for the parameters on this screen are shown.
2. Press 1 to select S
The switch type selected here must match the TELCO CO switch providing the ISDN service.
Select option 1 for L
the example network in Figure 1, we will assume the switch type for all units is N
3 and press
<Enter>
3. Press 2 to select B-C
for 64kbps; then press
ISDN service only provides 56kbps.
4. To configure the N
1 for single channel service or 2 for dual channel service and press
a host unit with a PRI card, the N
5. Select option 4 and press
assigned by the Telephone Company for the first B-channel and press
network in Figure 1, the proper SPID is 25655520000101.
6. If the N
UMBER OF
IQ 710 System Manual
once to get back to the C
and press
PTIONS
Figure 27. ISDN Options Menu
T ; then press
WITCH YPE
5ESS, 2 for DMS 100, 3 for N
UCENT
.
B R ; then press
HANNEL IT ATE
. Generally leave this value to its default of 64kbps unless your
<Enter>
B-C
UMBER OF HANNELS
UMBER OF
to program the SPID for the first B-channel. Enter the SPID
<Enter>
B-C is set to 1, leave SPID2 blank.
HANNELS
D B
ONFIGURE IAL ACKUP
The menu screen shown in Figure 27 is dis-
<Enter>.
. A list of available switch types is displayed.
<Enter>
, or 4 for NEC; press
ATIONAL
. Select option 1 for 56kbps or option 2
<Enter>
on the BRI line, press option 3 and press
B-C should always be 1.
HANNELS
screen shown in Figure 22.
<Enter>
, so press
ATIONAL
<Enter>
. When connecting to
<Enter>
. For the example
<Enter>
© 2002 ADTRAN, Inc.
. For
. Enter