ADTRAN IQ 710 System Manual page 100

61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 100
Perform Steps Below in the Order Listed
1. Connect to the IQ 710 using the E
If you are not already connected to the unit's
procedure in DLP-012 to connect to the unit.
2. Login to the unit (see DLP-002 for details).
3. Go to the U
TILITIES
pane menus.
4. Go to the X
FER
5. Enter into TFTP S
The ADTRAN Utilities TFTP Server must be active before performing TFTP transfers.
If using ADTRAN Utilities, the server IP address will appear in the status window.
6. Enter into TFTP F
7. View C
URRENT
tered during the download process.
Refer to the table on the following page for a detailed description of messages found in this field.
IQ 710 System Manual
THERNET
/F U
IRMWARE PGRADE
M menu and select TFTP.
ETHOD
IP A , the IP address of the network TFTP server.
ERVER DDRESS
, the full path name and filename of the update file.
ILENAME
S to verify the progress of the current firmware update or any errors encoun-
TATUS
DLP-006
interface.
E port using Telnet client software, use the
THERNET
menu and press the right arrow key to access the right-
© 2002 ADTRAN, Inc.