ADTRAN IQ 710 System Manual page 268

61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 268
At this point all PVC options have been configured for basic Frame Relay dial backup between Huntsville
and the four remote sites. The PVC entries on the Huntsville IQ 710 should look like the screen shown in
Figure 27. The remaining options may be left at their default values. The
,
C D M
HECKING ELAY EASUREMENT
nation of these features, please refer to the IQ 710 User Manual.
Atlanta IQ 710 (DLCI 100)
1. From the PVC O
. Type in 100 and press
<Enter>
2. Use the right arrow to select DBU DLCI; then press
Notice that the TELCO-assigned DLCI of 100 for Atlanta's Frame Relay link to Huntsville is pro-
grammed in the DLCI field. The TELCO-assigned DLCI of 200 for Huntsville's Frame Relay link
to Atlanta is programmed in the
backup operation.
3. Use the right arrow to select DBU P
press . The phone number that the Atlanta IQ 710 will dial to reach the Huntsville IQ 710 to
<Enter>
establish a dial backup connection has now been programmed.
IQ 710 System Manual
, and options are features not related to dial backup. For an expla-
S
TATS
Figure 27. Huntsville PVC Options Screen
screen shown in Figure 23, use the right arrow to select DLCI; then press
PTIONS
.
<Enter>
DBU DLCI
HONE
. Type in 200 and press
<Enter>
field. These two entries are critical for proper dial
N ; then press
<Enter>
UMBER
,
CIR S N
EQUENCE UMBER
<Enter>
. Type in 12565551000 and
© 2002 ADTRAN, Inc.
.