ADTRAN IQ 710 System Manual page 157

ISDN Options
1. From the screen shown in Figure 9, press the down arrow to select ISDN O
shown in Figure 10 is now displayed. The default values for the parameters on this menu are
shown.
2. Use the right arrow to select S
displayed. The S
service. Select LUCENT 5ESS, DMS 100, N
network in Figure 1, we will assume the switch type for all three IQ 710 DBU Cards is N
Down arrow to select N
3. Down arrow to select B-C
press <Enter>. Generally leave this value to its default of 64
provides 56kbps.
4. Down arrow to select the N
single channel service or 2 for dual channel service and press
has given you two SPIDs, you should set the N
5. Down arrow to select SPID1; then press
pany for the first B-channel and press
SPID is entered here depending upon which IQ 710 is being configured.
6. Down arrow to select SPID2; then press
pany for the second B-channel and press
© 2002 ADTRAN, Inc.
Figure 10. ISDN Options Menu
T
WITCH YPE
T selected here must match the TELCO CO switch providing the ISDN
WITCH YPE
; then press
ATIONAL
B R
HANNEL IT ATE
B-C
UMBER OF
<Enter>
; then press . A list of available switch types is
<Enter>
, or NEC and press
ATIONAL
.
<Enter>
; then press . Select 54
<Enter>
KBPS
on the BRI line; then press
HANNELS
<Enter>
B-C
UMBER OF HANNELS
. Enter the SPID assigned by the Telephone Com-
<Enter>
. For the example network in Figure 1, the proper
. Enter the SPID assigned by the Telephone Com-
<Enter>
. Again, for the example network in Figure 1, the
<Enter>
61202800L1-1B
Section 6, Configuration Guides
Page 157
. The screen
PTIONS
. For the example
<Enter>
ATIONAL
or 64
KBPS KBPS
unless your ISDN service only
. Enter 1 for
<Enter>
. If your Telephone Company
to 2.
IQ 710 System Manual
IQ 710
.
and