ADTRAN IQ 710 System Manual page 189

4. Use the right arrow to select DBU PHONE NUMBER; then press
and press
<Enter>
IQ 710 to establish a dial backup connection has now been programmed.
5. Use the right arrow to select C
the table to be prioritized in the event that multiple PVCs are lost at once. Dial backup will first be
attempted on the PVC with the lowest Call Order that meets the DBU Criteria settings. Leave this
parameter at the default value of none.
The
DBU O I
N NACTIVE
to assure the
G
ROUP
At this point all PVC Options have been configured for basic Frame Relay dial backup to Huntsville. The
PVC entries on the Atlanta IQ 710 should look like the screen shown in Figure 24. The remaining options
may be left at their default values. The
S options are features not related to dial backup. For an explanation of these features, please refer to
TATS
the IQ 710 User Manual.
© 2002 ADTRAN, Inc.
. The phone number that the Atlanta IQ 710 will dial to reach the Huntsville
O
ALL RDER
parameter is disabled by default. For this example, leave it disabled in order
parameter on the host unit will initiate dial backup.
,
CIR S
EQUENCE
Figure 24. Atlanta IQ 710 PVC Options Screen
N . DBU C O
UMBER ALL RDER
N C
UMBER HECKING
61202800L1-1B
Section 6, Configuration Guides
Page 189
. Type in 12565551000
<Enter>
allows each DLCI listed in
,
D M
ELAY EASUREMENT
IQ 710 System Manual
IQ 710
, and