ADTRAN IQ 710 System Manual page 229

ISDN Options
1. Use the down arrow to select ISDN O
is displayed. The default values for the parameters on this screen are shown.
2. Use the right arrow to select S
displayed. The switch type selected here must match the TELCO CO switch providing the ISDN
service. Use the arrow keys to select L
For the example network in Figure 1, we will assume the switch type for all units is N
use the arrow keys to select N
3. Press the down arrow to select B-C
select 56kbps or 64kbps; then press
unless your ISDN service only provides 56kbps.
4. Down arrow to select N
or 2 for dual channel service and press
the N
UMBER OF
5. Down arrow to select SPID1 for the first B-Channel. Enter the SPID assigned by the Telephone
Company for the first B-channel and press
proper SPID is 25655520000101.
6. If the N
UMBER OF
© 2002 ADTRAN, Inc.
PTIONS
Figure 40. ISDN Options Menu
T
WITCH YPE
UCENT
; press
ATIONAL
HANNEL
<Enter>
B-C
UMBER OF HANNELS
B-C should always be 1. Select 1 and press
HANNELS
B-C is set to 1, leave SPID2 blank.
HANNELS
; press The menu screen shown in Figure 40
<Enter>.
; then press . A list of available switch types is
<Enter>
5ESS, DMS 100, N
.
<Enter>
B R ; then press
IT ATE
. Generally leave this value to its default of 64kbps
; press . Enter 1 for single channel service
<Enter>
. When connecting to a host unit with a PRI card,
<Enter>
. For the example network in Figure 1, the
<Enter>
61202800L1-1B
Section 6, Configuration Guides
, or NEC; press
ATIONAL
ATIONAL
. Use the arrow keys to
<Enter>
<Enter>.
IQ 710 System Manual
IQ 710
Page 229
.
<Enter>
, so