ADTRAN IQ 710 System Manual page 5

FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of FCC rules. On the bottom of the equipment housing is a label
showing the FCC registration number and ringer equivalence number (REN). If requested, provide this
information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may temporarily dis-
continue service. If possible, advance notification is given; otherwise, notification is given as soon as
possible. The telephone company will advise the customer of the right to file a complaint with the
FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the proper operation of this equipment. Advance notification and the opportunity to main-
tain uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty infor-
mation. The telephone company may require this equipment to be disconnected from the network until
the problem is corrected or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts. In the event of equipment malfunction, all repairs should
be performed by ADTRAN. It is the responsibility of users requiring service to report the need for ser-
vice to their distributor or ADTRAN. See Customer Service, Product Support Information, and Train-
ing in this front matter for information on contacting ADTRAN for service
6. An FCC compliant telephone cord with a modular plug is provided with this equipment. This equip-
ment is designed to be connected to the telephone network or premises wiring using an FCC compati-
ble modular jack, which is Part 68 compliant.
7. The following information may be required when applying to the local telephone company for leased
line facilities:
Part Number Reg. Number
1202801L1 HDCUSA-44573-DE-N
1202802L1
HDCUSA-44574-DE-N
1202803L1
1202805L1 US: HDCDENAN1200805L1
8. The REN is useful in determining the quantity of devices you may connect to your telephone line and
still have all of those devices ring when your number is called. In most areas, the sum of the RENs of
all devices should not exceed five. To be certain of the number of devices you may connect to your
line as determined by the REN, call your telephone company to determine the maximum REN for your
calling area.
9. This equipment may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs. Contact your state public utility commission or corporation com-
mission for information.
© 2002 ADTRAN, Inc.
Service Type
56 kbps Digital Interface
64 kbps Digital Interface
1.544 Mbps-SF
1.544 Mbps-SF and B8ZS
1.544 Mbps-ESF
1.544 Mbps-ESF and B8ZS
REN/SOC FIC
04DU5-56
6.0F
04DU5-64
04DU9-BN
04DU9-DN
6.0F
04DU9-1KN
04DU9-1SN
IQ 710 System Manual
USOC
RJ-48S
RJ-48C