ADTRAN IQ 710 System Manual page 108

61202800L1-1B
IQ 710
Section 5, Detail Level Procedures
Page 108
Perform Steps Below in the Order Listed
There are two ways to access the remote login screen: pressing Control-R at initial login or logging into
and out of the local unit. The Control-R at initial login is not available with the ADTRAN Utilities VT-
100 since you must first choose session>connect to login to the unit. This DLP will describe both meth-
ods.
Control-R at Initial Login to Access Remote Login
1. Connect the IQ 710 to the VT-100 system (details found in DLP-001).
2. After connection to the system, a blank screen will appear.
3. Type Control-R, and the following screen will appear.
IQ 710 System Manual
DLP-008
© 2002 ADTRAN, Inc.