Holding An M40E Fpc Horizontally; Figure 74: Holding An Fpc Vertically - Juniper M40E Hardware Manual

Related
Documentation

Holding an M40e FPC Horizontally

Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com

Figure 74: Holding an FPC Vertically

FPC LEDs and Controls on the M40e Craft Interface on page 38
M40e FPCs Supported on page 17
Replacing an FPC in an M40e Router on page 191
M40e Flexible PIC Concentrators (FPCs) Description on page 13
Holding an M40e FPC Overview on page 133
If the FPC is horizontal before you grasp it, place your left hand around the faceplate and
your right hand along the bottom edge. To hold an FPC horizontally (see Figure 75 on
page 138):
Orient the FPC so that the faceplate faces you.
1.
Grasp the top edge with your left hand and the bottom edge with your right hand. If
2.
the FPC has heat sinks about midway between the faceplate and connector edge,
place your right hand against the heat sinks.
You can rest the faceplate of the FPC against your body as you carry it.
Chapter 14: Maintaining M40e Router Hardware Components
137