M40E Rack Requirements - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
Table 14: Site Preparation Checklist (continued)
Item or Task
Verify that your rack meets the minimum
requirements for the installation of the router.
Plan rack location, including required space
clearances.
If a rack is used, secure rack to floor and building
structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
Related
Documentation

M40e Rack Requirements

68
All manuals and user guides at all-guides.com
For More Information
"M40e Rack Size and Strength" on
page 69
"M40e Clearance Requirements for
Airflow and Hardware Maintenance"
on page 71
"M40e Connection to Building
Structure" on page 71
"Calculating Power Budget for
Fiber-Optic Cable for M Series, MX
Series, and T Series Routers" on
page 285
"Calculating Power Margin for
Fiber-Optic Cable for M Series, MX
Series, and T Series Routers" on
page 286
"Maintaining M40e PICs and PIC
Cables" on page 139
M40e Chassis Description on page 8
M40e Router Physical Specifications on page 269
M40e Chassis Lifting Guidelines on page 235
General Safety Guidelines and Warnings for M Series, MX Series, and T Series Routers
on page 229
M40e Router Environmental Specifications on page 271
The M40e Multiservice Edge Router must be installed in a rack. Many types of racks are
acceptable, including 4-post (telco) racks and open-frame racks. An example of a
open-frame rack appears in "M40e Rack Size and Strength" on page 69.
The following sections describe rack requirements:
M40e Rack Size and Strength on page 69
Spacing of the M40e Mounting Holes on page 70
M40e Connection to Building Structure on page 71
Performed By Date
Copyright © 2010, Juniper Networks, Inc.