Figure 64: Routing Engine Management Ports And Alarm Relay Contacts - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
112
All manuals and user guides at all-guides.com
For management and service operations, you connect the Routing Engine to an external
console or management network through ports on the Connector Interface Panel (CIP).
You can also connect the router to external alarm-reporting devices through the alarm
relay contacts on the CIP. (For more information, see "M40e Connector Interface Panel
(CIP) Description" on page 39.)
After you have installed the router into the rack, attach one or more external devices to
the ports on the CIP that connect to the Routing Engines for management and service
operations (see Figure 64 on page 112). For specifications for the cable accepted by the
Routing Engine management ports, see "Routing Engine Interface Cable and Wire
Specifications for the M40e Router" on page 288.

Figure 64: Routing Engine Management Ports and Alarm Relay Contacts

Copyright © 2010, Juniper Networks, Inc.