Figure 70: Connecting Dc Power Cables - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
Related
Documentation
122
All manuals and user guides at all-guides.com
industry standards, such as the National Electrical Code (NEC) and Insulated Cable
Engineers Association (ICEA). Do not bend a power cable beyond the specified
minimum bend radius.
Verify that the source power cabling and the grounding cabling are correct, that they
7.
are not touching or blocking access to router components, and that they do not drape
where people could trip on them.
Replace the protective shield over the terminal studs and use a Phillips screwdriver
8.
to tighten the screws.
Turn on the current from the power source so that voltage flows to the router.
9.

Figure 70: Connecting DC Power Cables

DC Power Disconnection Warning for M Series, MX Series, and T Series Routers on
page 259
M40e DC Power Electrical Safety Guidelines on page 257
M40e DC Power Distribution on page 280
Disconnecting DC Power from the M40e Router
Copyright © 2010, Juniper Networks, Inc.