Inserting The M40E Pc Card; Figure 98: Removing The Pc Card - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
184
All manuals and user guides at all-guides.com

Figure 98: Removing the PC Card

Inserting the M40e PC Card

To insert the PC Card (see Figure 99 on page 185):
Orient the PC Card with the Juniper Networks logo facing in the direction specified on
1.
the Routing Engine faceplate. Insert the card into the slot.
Press the card firmly all the way into the slot. Note that the PC Card slot might be
2.
located in a different position from that shown in Figure 99 on page 185.
Reinstall the rear component cover and tighten the thumbscrew at each corner to
3.
secure it to the chassis. For complete instructions, see "Reinstalling the M40e
Components into the Chassis" on page 97.
CAUTION: To maintain proper airflow and provide electromagnetic
shielding, do not operate the router without the rear component cover in
place.
Copyright © 2010, Juniper Networks, Inc.