General Safety Information; General Safety Guidelines And Warnings - Juniper EX4600 Series Hardware Manual

CHAPTER 12

General Safety Information

General Safety Guidelines and Warnings

Copyright © 2014, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 91
Definitions of Safety Warning Levels on page 92
Fire Safety Requirements on page 94
Qualified Personnel Warning on page 95
Warning Statement for Norway and Sweden on page 96
This topic applies to hardware devices in the EX Series product family, which includes
switches, the EX Series Redundant Power System (RPS), and the XRE200 External
Routing Engine.
This topic also applies to hardware devices in the QFX Series.
The following guidelines help ensure your safety and protect the device from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in the hardware documentation for
this device. Make sure that only authorized service personnel perform other system
services.
Keep the area around the device clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the device.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
91