Table 16: Cable Specifications For Console And Management Connections For The Qfx Series - Juniper EX4600 Series Hardware Manual

Hide thumbs Also See for EX4600 Series:
Table of Contents

Advertisement

EX4600 Switch Hardware Guide
Related
Documentation
Cable Specifications for Console and Management Connections for the EX4600

Table 16: Cable Specifications for Console and Management Connections for the QFX Series

Port on QFX Series
Device
Cable Specification
Console port
RS-232 (EIA-232) serial cable
Management port
Category 5 cable or
equivalent suitable for
1000BASE-T operation
* Optics, Fans and Power supply sold separately for EX4600-40F-S.
44
If the switch is running Junos OS Release 9.5 or earlier, the formatting method must
use a master boot record. Microsoft Windows formatting, by default, does not use a
master boot record. See the documentation for your USB flash drive for information
about how your USB flash drive is formatted.
EX2200 Switches Hardware Overview
Rear Panel of an EX3200 Switch
Rear Panel of an EX3300 Switch
Rear Panel of an EX4200 Switch
EX4300 Switches Hardware Overview
Front Panel of an EX4500 Switch
Management Panel of an EX4600 Switch on page 9
EX4550 Switches Hardware Overview
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch
Routing Engine (RE) Module in an EX8216 Switch
Routing Engine Module in an EX9200 Switch
Booting an EX Series Switch Using a Software Package Stored on a USB Flash Drive
Table 16 on page 44
lists the specifications for the cables that connect the QFX Series
to a management device.
NOTE:
The QFX Series can be configured with SFP management ports that
support 1000BASE-SX transceivers. See
SFP+, and QSFP+ Transceivers for the EX4600 Switch" on page 49
information about the fiber-optic cables required for use with these
transceivers.
Cable Supplied
One 7-foot (2.13-meter) length
RJ-45 patch cable and RJ-45 to
DB-9 adapter
One 7-foot (2.13-meter) length
RJ-45 patch cable
"Interface Specifications for SFP,
Device
Maximum Length
Receptacle
7 feet (2.13 meters)
RJ-45
328 feet
RJ-45
(100 meters)
Copyright © 2014, Juniper Networks, Inc.
for more

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents