Hand-Held Reader Writer Functions; Communications With The Data Carrier - Omron V600 Operation Manual

Hand-held Reader Writer Functions

2-7

Hand-held Reader Writer Functions

2-7-1 Communications with the Data Carrier

Normal Commands
1, 2, 3...
Host computer
12
There are 4 types of commands for communicating with the Data Carrier using
the Hand-held Reader Writer.
• Normal commands
• Button commands
• Auto commands
• Button auto commands
Normal commands are sent from the host device for communications with the
Data Carrier, after the antenna section of the Hand-held Reader Writer have
been brought close to the Data Carrier. If the antenna is not in front of the Data
Carrier when a command is sent from the host device, a "Data Carrier non-exis-
tent error" will result.
1. Place the antenna of the Hand-held Reader Writer near the Data Carrier.
Hand-held Reader Writer
2.
Command
4.
Response
2. Commands are sent from the host device to the Hand-held Reader Writer.
3. The Hand-held Reader Writer communicates with the Data Carrier. The op-
eration indicator is lit green.
4. A response is given from the Hand-held Reader Writer to the host device.
The operation indicator (LED) is not lit.
Section
1.
Data Carrier
3.
Transmission
with Data Carrier
2-7