Sony PetaSite CSM-200B Installation Manual page 82

8. Installing the hard disk in the PCU
(1) Remove the blank panel from the drive bay of the PCU.
(2) While pushing the LOCK buttons on the both side of the blank panel in the direction of the
arrow 1, hold the blank panel.
(3) Draw the blank panel out from the drive bay in the direction of the arrow 2.
(4) Press the EJECT button of HDD. While the EJECT lever is kept open, push the HDD into the
drive bays ID [0] and ID [1] of the PCU.
(5) Close the EJECT levers.
Eject button
4-64
Lock button
1
2
1
Blank panel
Eject lever
2
1
1
Eject lever
CSM-200