Sony PetaSite CSM-200B Installation Manual page 41

6. Tighten both of the Basic storage system and the extension console with the eight hexagon head cap
(M4 x 8) bolts supplied with the extension console.
7. When more than one consoles are expanded each other, use a caliper and measure the dimensions
between [A]-[A] of the X-reference pins of next consoles. Measure the dimensions between [A]-[A]
at both of the top stage (L1) and bottom stage (L2). (Write down the measured values in the follow-
ing table.)
8. Connect the two flat cables (50-pins and 26-pins) coming from the Basic storage system to the
connectors of the extension console.
Table 1
Basic dimensions
L1
L2
Difference (L1-L2)
Accumulative differences
B : Basic storage system
EX : Extension console
CSM-200
M4 x 8
X reference
pins [A]
26 pin
M4 x 8
50 pin
X reference
pins [A]
B-EX1 EX1-EX2 EX2-EX3
40 mm 40 mm 40 mm
X reference
pins [A]
L
Caliper
EX3-EX4 EX4-EX5 EX5-EX6
40 mm 40 mm 40 mm
Specification : ±2 mm
EX6-EX7
40 mm
4-23