Multi port av storage unit, internal memory array 2tb, sdi interface board, bpu share play board, networked media interface board, 12g-sdi interface board (124 pages)
Page 14
MENU INITIAL READY BUSY ERROR POWER READY BUSY ERROR ESC/ INITIAL MENU ENTER ENTER MENU ESC/CLR ENTER ESC/CLR INITIAL READY BUSY ERROR Initial Request Full Initial Request Power off Request 12(J)
Page 15
IN/OUT PetaSite NO MAGAZINE OPEN IN /OUT OPEN MAGAZINE OPEN MAGAZINE POWER NO MAGAZINE POWER IN/OUT OPEN 13(J)
Page 23
Set Up Hours Meter Program Version Set Up Configuration 21(J)
Page 24
(Repair filesystem) 2# init 6 # /sbin/init 6 /export/home:UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) *** An error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. Give root password for maintenance (or type Control-D for normal startup) *** An error occurred during the file system check.
Page 26
PetaApp Linux Hostname/IP Address (eth0) (eth1) GPL/LGPL CSM-200BF/200BS/100BF/100BS/60BF/ 60BS • • IP Address http://www.sony.net/Products/Linux/ IP Address Port Number SILKWORM 3800/3200 IP Address 24(J)
Page 31
WARNING: THIS WARNING IS APPLICABLE FOR USA WARNING ONLY. To prevent fire or shock hazard, do not expose the unit to rain or moisture. If used in USA, use the UL LISTED power cord specified below. To avoid electrical shock, do not open the cabinet. Refer DO NOT USE ANY OTHER POWER CORD.
Page 32
LED Notice: The LED of the barcode reader incorporated inside this product complies with IEC 60825-1. This product is classified as a CLASS 1 LED PRODUCT. LED (barcode reader) Wavelength 630–660 nm For models with FC-conforming SAIT drives Laser Notice: The equipment contains tape drives using laser that complies with IEC 60825-1.
Table of Contents Overview ....................4(E) Product Line-up of the PetaSite S200-Series ........4(E) Features of the PetaSite S200-Series ..........5(E) Extension Example ................6(E) System Equipment ................7(E) Notes on Maintaining the Performance of the System ..................8(E) Locations and Functions of Parts ............9(E) Front and Side .................9(E) Display Panel .................11(E) IN/OUT Ports ................12(E)
SCSI speed. It contains the PetaSite Control Unit and DZC- CSM-100BF PSC2 PetaSite control software in the Basic Storage Max. 108 Max. 54TB System models as a package. CSM-100BS SCSI CSM-60BF Max. 60 Max. 30TB CSM-60BS SCSI Using the optional CSMA-PSL power unit dedicated...
Cassette management using bar codes Features of the PetaSite S200- The system includes a barcode reader to aid in Series management of cartridges with barcode labels attached to the cartridges. The CSM System works in a heterogeneous environment. Its SAN solution makes this high-speed Easy control backup subsystem possible.
Overview Extension Example Data capacity can be increased by connecting up to seven CSM-200D/200C Extension Consoles to the CSM-200BF/200BS Basic Storage System. CSM-200BF/200BS CSM-200D/200C Note The Extension Consoles cannot be connected to the CSM-100BF/100BS/60BF/60BS. To connect one, upgrade the CSM-100BF/100BS/60BF/60BS to the CSM-200BF/200BS using the appropriate Upgrade Kit (option).
CSMU-200B Upgrade Kit CSM-100BF/100BS to System Equipment CSM-200BF/200BS This is the kit to upgrage the CSM-100BF/100BS to CSMA-DR130F Storage Management System the CSM-200BF/200BS. Drive Unit (FC) This is the hot-swapping FC drive unit (attachment DMSA-CPE Power Cord included) for dedicated use with libraries. This is the power cord for the PetaSite S200-series and the PetaSite Control Unit (PCU) (AC 120 V).
Notes on Maintaining the Performance of the System Pay attention to the following points when handling Mounting the PetaSite Control Unit the system equipment and media, so as not to damage A specially trained technician must mount the PetaSite them and to maintain top performance. Control Unit.
Locations and Functions of Parts Front and Side CSM-200BF/200BS/100BF/100BS/60BF/60BS Inside front Front panel POWER READY BUSY ERROR Display panel check window ESC/ 3 Display panel INITIAL MENU ENTER OPEN 4 IN/OUT port 9 10 11 12 OPEN Slot for optional redundant power unit (for DRIVE) 1 DRIVE power switch Slot for optional drives...
Page 40
Locations and Functions of Parts 1 DRIVE power switch 5 PetaSite Control Unit This is for turning the power to the drive block on and The unit controls and monitors the drives and robot off. block. When turning on the power, set it to the I position For details, see “PetaSite Control Unit (PCU)”...
Turn the power off and then on again. 2 READY indicator 3 BUSY indicator If the problem persists after executing the above, 4 ERROR indicator consult Sony service personnel. 5 Display window The operating condition, menu items, or values are POWER READY BUSY ERROR displayed here.
Locations and Functions of Parts IN/OUT Ports PetaSite Control Unit (PCU) The unit controls and monitors the drives and robot block. It also functions as the application server for PetaServe 1 NO MAGAZINE indicators 4 OPEN buttons and PetaBack. 3 Function buttons 2 IN/OUT indicators OPEN MAGAZINE...
Preparations Installation Ethernet Interface Ports of the A technician specially trained for CSM system and PetaSite-series equipment must perform setting and The PCU has two Ethernet interface ports: one for the wiring the units, and making system environment local network to control the PetaSite system, and settings.
The host name and IP address can not be changed after button of the MMT window of the DZC-PSC2. starting operation of the CSM System. If you need to change them, contact to Sony support center. Starting the DZC-PSC2 Type “root” in the Username box to log in, and Follow the procedures below to start the DZC-PSC2.
Page 45
Enter the command shown below and press the If no display appears after changing the Enter key to execute the command. PCU settings # /osm/bin/app_sethostname Press [Ctrl]+[Alt]+[F6] simultanously. Type “/sbin/init 6” in the Terminal window opened in step 1 and press the Enter key to restart Log in as a root user.
Page 46
Preparations • To use the on-line help for the remote maintenance Set the environmental variables BROWSER and tool, you need a Web browser. Operation with the XAPPLRESDIR with the startup file of the on-line Web browsers shown below has been confirmed. help {folder where DZC-PSC2 has been installed}/ bin/webhelp as shown below.
Page 47
For UNIX: To start the PetaApp Monitor GUI: Enter the command below. %{folder where the DZC-PSC2 has been installed}/bin/ petaapp where % is the command prompt. The PetaApp Monitor GUI is activated. To start the Monitoring & Maintenance Terminal GUI: Click on the PetaSite button of the PetaApp Monitor GUI, and the Monitoring &...
Operations Starting Up Ending Set both the DRIVE and ROBOT power switches Terminate all applications of the CSM-200BF/200BS/100BF/100BS/60BF/ 60BS to the I position (ON). Check that no cartridge is installed in any drive. If an optional fibre channel switch has been Terminate the PCU following the procedures installed in the system, turn it on.
To load a cartridge, put a cartridge in the magazine so that its bar code can be read and the side with Install or remove cartridges using the following character indication, such as “SONY,” faces the procedure: direction shown in the figure below.
Operations Setting the items in Set Up menu Menu Operation Items on the Set Up menu can be set using the When you press the MENU button on the display following procedures. panel, one of the following menu items appears in the display window.
When “(Repair filesystem)2#” appears, type Restarting the PCU “init 6,” then press the Enter key to restart the unit. Type “root” in the Username box to log in. The display changes to “(Repair filesystem)2# init 6.” Type the following in the Terminal window. If the repair is completed, the unit starts up normally.
/osm/doc directory. For information on the configuration to use the preinstalled PetaServe/PetaBack and the interconnection environments, ask your Sony dealer. To apply PetaServe and PetaBack in practical operation, you may continue to use them by purchasing the formal software license.
PetaApp Linux Initial Settings of Device The PCU adopts PetaApp Linux as the OS. Sony Settings at the factory are as shown below. Corporation has specially designed PetaApp Linux for the PetaSite Control Unit based on the RedHat Linux 8.0 ftp version. In the window, messages related to RedHat Corporation may appear, but RedHat Hostname/IP Address (eth0) : petalocal.petadomain...
Page 54
Operations DZC-PSC2/MMT If Mail/Remote Maintenance of Setup has not been set, initial settings are not required. Items DXC-PSC2/MMT Communication Port Condition TerminalServer 10.0.0.30, 10001 TerminalServer 10.0.0.40, 10001 Bin Division no setting (to be set depending on the user system configuration) Reserve Bin no setting Drive Condition...
Page 55
CSMA-DR100S/CSMA-DR130F Items CSMA-DR100S CSMA-DR130F Vendor ID (0 – 99999999) Vendor name (8 characters) SONY SONY Vendor ROM version (4 characters) 1.?? 1.?? Machine name (16 characters) SDZ-100 SDZ-130 Interface (0: SCSI-WD/1: SCSI-WS/2: SCSI-UWD/3: SCSI-LVD/ 8: Fibre channel/12: VRP) Series (0: SAIT-1 / 1: SAIT-2 / 2: SAIT-3 / 3: SAIT-4)
Power unit CSMA-PSL (for redundant Specifications of Barcode Reader library) CSMA-PSD (for redundant The built-in bar code reader conforms to CODE 39, drive) and the specifications of the barcode labels are as Redundant drive interface board shown below. CSMA-DIF Upgrade kit CSMU-100B CSMU-200B Keyboard...
Page 58
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...