Table of Contents
Advertisement
9. Install the rails for PCU that are removed in Step 2.
(1) Align the lowest hole of the rack mount plates and the lower fixed pin of the slide mounting
brackets.
(2) Slide the slide mounting brackets to the point where the lock plates on the front and the back are
locked.
(3) Check that the slide mounting brackets are installed securely.
10. Install all of the blank panels (1U) that are removed in step 1.
CSM-200
Slide mounting
bracket
[1]
Slide mounting
bracket
Lock plate
[2]
Lock plate
4-17
Advertisement
Table of Contents
