Table of Contents
Advertisement
11. Fixing the extension consoles
(1) Rotate all of the adjuster foot of the expanded extension consoles by hand down to the height of
casters until the feet of the Basic storage system contact the floor, and completely ground them
on the floor.
(2) Install tentatively the washers and hexagon nuts (20) that are supplied with the extension
console, in the screwed portions of the four adjuster feet. (Tighten them at the four positions.)
(3) Lift up the casters until the casters clear the ground, and move the load to the adjuster feet.
(4) Tighten finally the four hexagon nuts (20) with the four washers that are tentatively tightened in
step (2).
CSM-200
Hexagon nut (20)
Washer
Hexagonal bolt
block
Adjuster foot
4-25
Advertisement
Table of Contents
