Table of Contents
Advertisement
9. Select the "Run" button and start executing the test program.
→ If any trouble occurs while the test is in progress, check error code of the PetaSite, perform the
recovery operation and re-start the test program.
(Refer to the PSC help for error coad.)
10. Operation test ends.
→ When the operation test is completed, close the Program screen, select "System Information" of
the "Log" menu to open the System Information screen. Save the contents in the floppy disk for
storage. Upon completion of saving data, change the MMT mode to the user mode, and pass the
system to the system administrator.
CSM-200
7-5
Advertisement
Table of Contents
