Table of Contents
Advertisement
Installing the basic storage system when connecting the extension consoles in the range
of 2 to 7 extension consoles
Determining the installation location
Determine the installation location and move the basic storage system.
n
Free space allowing to open/close the door is necessary during inspection or maintenance.
(Refer to 4-1-1. "Installation Space".)
Determine the installation location taking the free space into consideration.
1. Remove all blank panels (1U). (Refer to "4-2-1. Opening the Outer Cabinets".)
n
Mount of blank panel (1U) varies with models.
2. If the rails (slide mounting bracket) for PCU are attached to the lowest row of the console, remove
the rails.
(1) Remove the slide mounting bracket from the console by pushing and holding the lock plate on
the front of the slide mounting bracket in the direction of arrow [1] and drawing it in the
direction of arrow [2].
(2) Remove the slide mounting bracket from the console by pushing and holding the lock plate on
the rear of the slide mounting bracket in the direction of arrow [3] and drawing it in the direction
of arrow [4].
(3) Remove the slide mounting brackets on both sides in the same procedure.
[1]
4-14
Slide mounting
bracket
[2]
Slide mounting
bracket
Lock plate
[4]
[3]
Lock plate
CSM-200
Advertisement
Table of Contents
