Table of Contents
Advertisement
(32) Check that the connection of the Runner flex around the X cable is not disconnected or loose at
any position. Check whether the transfer unit moves freely from an end stopper of the connected
rail to the other end stopper of it. Especially, confirm that the cable unit that runs from X
CABLE BRACKET (CBL-YR) to CB-117 does not touch the walls when the transfer unit is
moved to the basic console.
23. Installing the Outside Cabinets
(1) Install the side panel retainer that was removed in step 2 of "4-2-4. Extension console" to the
end console by reversing the steps of removal.
(2) Install the side panel (R) assembly that was removed in step 1 of "4-2-4. Extension console" to
the end console by reversing the steps of removal.
(3) Close the rear door and the bin door of all consoles.
CSM-200
4-55
Advertisement
Table of Contents
