Table of Contents
Advertisement
3. BIOS setup
n
Steps (2) through (5) are required for Proliant DL360 G3 only made by HP.
(1) Execute "ROM-Based Setup Utility" by pressing the F9 key in the "System currently configured for
Linux" screen.
(2) Select "System Option" from the menu.
(3) Select "OS Selection" from the "System Option" screen.
(4) Select "Linux" from the "OS Selection" screen.
(5) Close the "System Option" screen by pressing the ESC key.
(6) Select the "Standard Boot Order (IPL)" from the menu.
(7) For Proliant DL360 G5/G6, specify "IPL:1" for "CD-ROM." For others, specify "IPL:1" for "Floppy
Drive (A:)" and "IPL:2" for "CD-ROM."
(8) Close the "IPL" screen by pressing the ESC key.
(9) Select "Data and Time" from the menu, check and change the setting contents, and press the Enter
key. (Set the time setting to UTC (= GMT (Greenwich Mean Time)).)
(10) Close the menu screen by pressing the ESC key.
(11) Exit the "ROM-Based Setup Utility" by pressing the F10 key.
4-98
CSM-200
Advertisement
Table of Contents
