Table of Contents
Advertisement
(5) Tighten the hexagon head cap bolt (g) of the connecting block of the Basic storage system side.
Then align the X rail (top) of the extension console side with the reference surface.
Side of the extension
console
(6) Tighten the hexagon head cap bolt (a) that was provisionally tightened in step (4). Then confirm
that the clearance between the two X rails satisfies the specification.
Specification: Clearance should be less than 0.1 mm.
(7) Tighten the nut securing the hexagon head cap bolt (g) so that the bolt will not become loose.
(Use a wrench of diagonal size 7 mm.)
CSM-200
Side of the Basic storage system
(g) M4 x 16
X rail (top)
(g) M4 x 16
(a) M4 x 14
Thickness gauge 0.1 mm cannot
be entered.
Reference surface
Nut
4-27
Advertisement
Table of Contents
