Table of Contents
Advertisement
(7) Remove the two screws, and the CB-120 board and the CB-120 bracket from the Basic storage
system.
(8) Install the CB-120 board and the CB-120 bracket removed in step (7) to the expanded first
extension console.
(9) Attach the Harness (CBLS) assembly with two screws (PWH4 x 8) to the position where the
CB-120 bracket has been removed.
(10) Attach the harness that was removed from the connectors (CN300 and CN301) in step (5) to the
Harness (CBLS) assembly.
(11) Connect the harness of the Harness (CBLS) assembly to the connectors (CN300 and CN301) on
the CB-120 board installed in the first extension console.
(12) Fix the Flat cable that is connected to the connector (CN300) in step (11) with the cable clamp.
4-42
PWH4 x 8
CB-120 bracket
CB-120 board
PWH4 x 8
PWH4 x 8
Harness (CBLS) assembly
CN300
CN301
CB-120 board
PWH4 x 8
Cable clamp
Flat cable
CSM-200
Advertisement
Table of Contents
