Sony PetaSite CSM-200B Installation Manual page 72

(27) Attach the X cable cover with two screws (PWH4 x 8).
(28) Install the Idler (top) assembly on top of the extension console with the two screws (PWH4 x 8).
If the number of extension consoles is four or five, install the Idler (top) assembly on the third
extension console. If the number of extension consoles is six or seven, install the Idler (top)
assembly on the fourth extension console.
(29) Install the belt around the Idler (top) assembly.
(30) Install the Idler (bottom) assembly on the bottom of the extension console with two screws
(PWH4 x 8). If the number of extension consoles is four or five, install the Idler (bottom)
assembly on the third extension console. If the number of extension consoles is six or seven,
install the Idler (bottom) assembly on the fourth extension console.
(31) Install the belt around the Idler (bottom) assembly.
4-54
PWH4 x 8
X cable cover
Guide channel (EX3)
Timing belt
PWH4 x 8
PWH4 x 8
PWH4 x 8
Timing belt
Idler (top) assembly
PWH4 x 8
Idler (bottom) assembly
CSM-200