Table of Contents
Advertisement
2. iLO setup
The iLO is available for each loaded server.
DL360G4, DL360G4p: iLO
DL360G5/G6:
iLO2
DL360G7:
iLO3
The following functions are supplied by HP.
Note that the HP's supply method of these functions may be changed or they may be unavailable.
. System Management Homepage
This homepage is set on the browser's homepage after installation of the operating system.
https://localhost:2381/
. Systems Insight Display (SID)
This display is provided above the power button on the front panel of the unit.
For details of this display, refer to the Proliant DL360 Generation 5/6/7 Server User Guide supplied
with the server.
n
The following settings are required for Proliant DL360 G3 made by HP.
(1) Enter "Login to iLO ROM-Based setup utility" by pressing the F8 key when the "Integrated Lights-
Out press [F8] to configure" message appears.
(2) Enter the Login name and Password.
(The factory setting for the Login name and Password is written on the top panel of the PCU main
unit.)
(3) Login by pressing the F10 key.
(4) Select "Configure" from the "Settings" menu.
(5) Change the settings of "Lights-Out Functionality" and "iLO ROM-Based Setup Utility" in the
"Global iLO Settings" screen from "ENABLED" to "DISABLED".
(6) Execute SAVE by pressing the F10 key.
(7) Exit the "Login to iLO ROM-Based setup utility" by selecting "Exit" from the File menu and press-
ing the Enter key twice.
CSM-200
4-97
Advertisement
Table of Contents
