Table of Contents
Advertisement
CSMA-PSD (for drive)
1. Open the front door. (Refer to "4-2-1. Opening the Outer Cabinets".)
2. Remove the two screws (PWH3 x 5) and remove the blank panel (12 V).
Blank panel (12V)
PWH3 x 5
3. Insert the CSMA-PSD and install it using the two screws that were removed in step (2).
CSMA-PSD
4. Turn on the POWER switch of the CSMA-PSD.
5. Changing the settings of the Power supply from the Drive I/F Status screen on the MMT screen of the
PSC.
(1) Display the Drive I/F Status screen.
(2) Change the setting of the Power supply to Dual.
(3) Check whether the POWER DOWN error message is displayed on the PSC when the power
switches of the standard or redundant CSMA-PSD are turned off alternately. Also confirm that
errors of both are not displayed simultaneously.
4-108
PWH3 x 5
CSM-200
Advertisement
Table of Contents
