Table of Contents
Advertisement
14. Removing the X Belt
n
Do not apply excessive force to the drive block and fragile parts which can be easily damaged.
(1) Remove the four screws (M4 x 8), and move the X stoppers (T)/(B) from the Basic storage
system to the same position of the end console (the extension console that is expanded last).
(2) Remove the four hexagonal head cap bolts (M5 x 12) and the four washers (5.5 x 16 x 1.5)
from the X sliders (top)/(bottom) of the transfer assembly. Then remove the X belt holder
bracket.
4-30
M4 x 8
X stopper (T)
M4 x 8
X belt holder bracket
Washer (5.5 x 16 x 1.5)
M5 x 12
M5 x 12
X belt holder bracket
M4 x 8
X stopper (B)
X slider (top)
Washer (5.5 x 16 x 1.5)
X slider (bottom)
CSM-200
Advertisement
Table of Contents
