Sony PetaSite CSM-200B Installation Manual page 162

2. Turn on the main power of a PSC and start up the MMT display.
n
If the display is incorrectly set, the message "Out of Range" may appear and the display cannot be
used correctly. In such a case, take the " Note 1 " measure.
Note 1
Set X window again when the following symptoms occur in X window.
. The X window is out of the display frequency range for the display in use and the X window is not
shown.
. The 1024 x 768 is not displayed for resolution select.
For DL360 G3, G4, and G4p
Press ALT-CTRL-F6, and log into the root account.
# /usr/bin/redhat-config-xfree86--noui--reconfig
# reboot
For DL360 G5, G6, and G7
# /usr/bin/system-config-display--noui--reconfig
# reboot
(Refer to "If no display appears after changing the PCU settings" in the CSM Operation Manual.)
If the file system error prevents PetaApp Linux from starting, execute "fsck" manually.
(Refer to "Restarting when the PCU is stopped with power on" in the CSM Operation Manual.)
7-2
CSM-200