Table of Contents
Advertisement
(3) Log in to the system with "root", and then change the Network setting.
Click [GNOME Menu] (feet shaped icon).
Click [System Setting] -> [open Network setting window] to open the Network setting window.
Change the Network setting, including IP address and hostname, for the Secondary PC Server.
*1 Set external IP addresses and hostnames in accordance with the User LAN.
Exemplified here as "192.168.20.5 petahost2.petadomain, defaultroute: 192.168.20.254".
(a) Click the "host" tag to add to "hosts".
10.0.0.200
192.168.20.5 petahost2 petahost2.petadomain
(b) Click the "device" tag to change the IP address of eth0 and eth1.
Change the IP address of eth1 to "192.168.20.5".
Change defaultroute to "192.168.20.254".
Change the IP address of eth0 to "10.0.0.200".
(c) Click the "DNS" tag to change the hostname.
Change the hostname to "petahost2".
Set the Domain name as "petadomain".
Perform DNS Server settings, if necessary.
(d) Click [Apply] to fix the settings.
(4) Reboot
3. Install PSC2 in the Secondary PC Server.
4. Copy the Registory data file to the Secondary PSC2.
(1) Stop the PSC2 process at /psc/bin/pscend.
(2) Copy the Registory data file "restore.reg" created by the Primary PSC2 from the floppy disk to
/psc/restory.
(a) Mount a floppy disk.
Insert a floppy disk into the drive. Right-click on a free location on the desktop to display a menu.
Click [Disk] -> [Floppy] on the menu. When an FD icon appears on the desktop, the floppy
disk has been mounted.
(b) Copy the file.
Copy the file "restore.reg" using a command on the screen of the terminal.
# cp /mnt/floppy/restore.reg /psc/restore
(c) Unmount the floppy disk, and then remove it from the drive.
Right-click on the FD icon to display a menu.
Click [Eject] on the menu.When the FD icon disappears, the floppy disk has been unmounted.
(d) Remove the floppy disk from the drive.
(3) Start the PSC2 process at /psc/bin/pscstart.
5. Change the Cluster settings to those for the Secondary PC Server using the PetaApp GUI utility.
(1) Start Utility from PetaApp GUI.
(2) Change the mode to the Administrator mode.
(3) Perform Cluster Setup.
(a) Click the "Cluster Setup" tag.
(b) Select "I'm Secondary".
(c) Check the API User IP address (The same IP address for the Primary and Secondary PC
Servers.)(ex: 192.168.20.100).
(d) Enter Primary User IP address (ex: 192.168.20.3).
(e) Enter Primary Local IP address (ex: 10.0.0.100).
(f) Enter Application IP address(Host IP address) (The same IP address for the Primary and
Secondary PC Servers.) (ex: 192.168.20.1).
(g) Click [Apply].
4-124
petalocal2 petalocal2.localdomain
CSM-200
Advertisement
Table of Contents
