3. Release the lock of the ten P-joints in the front, and
remove the ten P-joints in the front starting from the
bottom P-joint, one after another.
P joint
4. Remove the Frame (front).
5. Release the lock of the two P-joints in the rear, and
remove the two P-joints.
Frame (front)
CSM-200
6. Open the bottom tray and remove the frame (frame
side use).
7. Remove the two slopes, open-end wrench (27 x 30)
and accessory box.
n
Details of the accessories packed in the accessory box are
P joint
described in Section 3-2-2.
Frame (frame side use)
Bottom tray
Slope
Open end
wrench (27 x 30)
Accessory box
3-3