Table of Contents
Advertisement
12. Connecting the X Rail (top)
n
Do not touch the linear way of the X rail with bare hands. Doing so may cause rust and prevent from
smooth operation of the transfer.
(1) Remove the two hexagon head cap bolts (a) securing the X rail of the extension console side.
(2) Loosen the five hexagon head cap bolts (b) and the two hexagon head cap bolts (e) of the
connection block and those of the X rail (top).
n
If the hexagon head cap bolts are loosened excessively, the X rail (top) may fall. Be careful not
to allow it to fall.
(f) M4 x 16
Connecting
block
(3) Loosen the hexagon head cap bolts (g) on the connection block of the Basic storage system side
and the hexagon head cap bolts (c), (d) and (f) on the connection block of the extension console
side. (Loosen the nuts, and then loosen the bolts.)
(4) Slide the X rail (top) of the extension console side in the direction of the arrow until it contacts
the X rail (top) of the Basic storage system side. Then secure them by tightening the two
hexagon head cap bolts (a) provisionally that were removed in step (1).
n
When provisionally tightening the hexagon head cap bolts (a), be careful not to create any
clearance between the X rail (top) and the connecting block.
(g) M4 x 14
Extension console
side
4-26
Connecting
block
(c) M4 x 16
(d) M4 x 12
Nut
Rail (T) holder
Nuts
(b) M4 x 14
(b) M4 x 14
Nut
X rail (top)
(a) M4 x 14
X rail (top)
(a) M4 x 14
X rail (top)
(e) M4 x 25
Basic console side
Connecting block
Push the X rails
each other.
(a) M4 x 14
CSM-200
Advertisement
Table of Contents
