Upgrade The Voice Gateway Media Card Software And Ip Phone Firmware - Avaya Nortel Communication Server 1000 Manual

3
4
5
6
7
8
9
10
Upgrade the Voice Gateway Media Card software and IP Phone
firmware
Before beginning, ensure that the following software is installed on the PC:
•
Copyright © 2003–2008, Nortel Networks
.
Upgrade the Voice Gateway Media Card software and IP Phone firmware 307
After all the Follower cards have the correct display on their
faceplates, log into Element Manager.
Select IP Network > Nodes: Servers, Media Cards .
The Node Configuration window appears.
Click the Transfer/Status button associated with the node.
The Transfer/Status window appears.
Select the desired Follower card.
Click Transfer to Selected Elements.
Click OK to confirm the transfer.
The Transfer Progress window appears and displays each of the
Voice Gateway Media Cards in the node. The Voice Gateway Media
Cards retrieve the CONFIG.INI and BOOTP.TAB files from the Call
Server.
When the transfer is complete, click OK in the Transfer Successful
dialog box.
If the transfer is successful for a card, the Status column displays
Complete. If the transfer is unsuccessful, the Status column
displays Fail .
If the Follower card is a new card (never used before), reboot the
card.
WARNING
Before beginning the upgrade, ensure that a PWD1 user name
and password has been configured on the Call Server. If there is
no PWD1 user name and password, configure them in LD 17.
This is necessary to enable logon to the Signaling Server and
Voice Gateway Media Cards.
Software to extract zipped files (WinZip or equivalent)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—