SC-F9200 Series
4.11.8 Manual Uni-d Adjustment for Between 2pcs heads
PAPER USED
Size: 24 inch length or longer
Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
ADJUSTMENT PROCEDURE
1.
Load the paper in the printer.
2.
Turn the printer ON.
3.
On the control panel, select the
Media Setup
setting to
RIP Settings
"0".
4.
Start the Service Program and select
2pcs
heads.
5.
Click [RUN], then the POPUP screen will be appeared.
ADJUSTMENT
menu and change the
Select Media
Manual Uni-d Adjustment for Between
Head Related Checks and Adjustments
Figure 4-46. [Manual Uni-d Adjustment for Between 2pcs heads] Screen
6.
On the control panel, set [1.5] in
7.
On the control panel, set [0.2mm] in
adjustment pattern will be printed.
8.
Repeat adjustment until the number of the pattern with least visible lines falls
between 2 through 8.
SE Group Confidential (Related Staff Only)
Revision C
Platen
Gap.
Head
Alignment. and then press [OK], the
323