Epson SC-F9200 Series Service Manual page 194

SC-F9200 Series
Rear of IC Holder
H
Top of IC Holder
H
Figure 3-138. Removing the IC Holder 2
DISASSEMBLY & ASSEMBLY
H
AFTER REPLACEMENT
H
1.
2.
3.
4.
5.
IC Holder 2
6.
7.
Disassembly and Assembly Procedure
Figure 3-139. IC Holder
Install the four ink cartridges for service.
Lower the lock levers.
Turn on the printer.
Discard the waste ink.
Select Initial ink charge.
Select Single channel -> Ink Holder 2 (Full)
and Ink Cartridge for service, and press the
ink charge. (p334)
Select Nozzle Check.
Select Nozzle Check Pattern Print, and press the
nozzle check. (p311)
Perform cleaning if necessary. (p313)
SE Group Confidential (Related Staff Only)
Revision B
.
(p207)
-> Cyan/Yellow, Magenta/ Black
[Run] button to perform the initial
[Run] button to perform the
194