Epson SC-F9200 Series Service Manual page 191

SC-F9200 Series
13. Disconnect the cables at the rear side from the three relay connectors (No.44,
No.60, and No.66), and release them from the two clamps. (The cables are bundled
with a piece of black tape.)
Figure 3-133. Releasing the Cables
DISASSEMBLY & ASSEMBLY
Tape
No.44
No.60
No.66
Disassembly and Assembly Procedure
Figure 3-134. Releasing the Cables
Regarding to SC-F9200 sries which have films to extend life, attach
the double-stick tape to fixe the film.
14. Disconnect the FFC from the rear of the IC Holder.
SE Group Confidential (Related Staff Only)
Revision B
Clamps
191