Counter Reset - Epson SC-F9200 Series Service Manual

SC-F9200 Series

4.7 Counter Reset

Whenever the parts/units which have life counter are replaced, the corresponding life
counter must be reset. This is important to replace those parts/units at the correct
timing.
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and click [FLAG CHANGE & COUNTER RESET]
from the main menu.
3. Choose one of the counter reset menus to be reset.
4. Click [Run] to reset the counter.
5. Click [Finish].
6. Restart the printer.
7. With NVRAM Viewer, verify that the counter has been reset to "0".
8. Turn the printer OFF.
ADJUSTMENT
Figure 4-11. [FLAG CHANGE & COUNTER RESET] Screen
Table 4-10. Clear Counter Menu List
Replaced Part/Unit
CR Motor
PF Motor
APG Motor Assy
Motors
Reel Motor
Mounting Plate Assy
ATC Motor
Printhead
Duct CR
Pump Cap Unit
Ink
System
Ink Holder
Ink tubes
Waste ink bottle
Counter Reset
Clear Menu Name
CR Motor Counter
PF Motor Counter
APG Motor Assy Counter
Reel Motor Counter
Reel Gear Counter
ATC Motor Counter
Print Head Counter
Selfsealing Valve Counter
Pump Cap Unit Counter
Ink Holder Counter
Ink tube Counter
Waste ink bottle counter
SE Group Confidential (Related Staff Only)
Revision C
293