Epson SC-F9200 Series Service Manual page 222

SC-F9200 Series
Hook
A
A
A
A
A
Figure 3-172. Removing the Front Frame
DISASSEMBLY & ASSEMBLY
Front Frame
Hook
A
A
A
A
Disassembly and Assembly Procedure
8. Disconnect the cable from the relay connector.
9. Release the cable from the clamp.
To prevent the screw of the Suction Fan from dropping inside the
C H E C K
P O I N T frame, remove the screw with rolled A4 paper put through the hole
of the frame.
10. Pass the rolled A4 paper through the hole on the frame.
11. Insert the screwdriver through the rolled A4 paper to remove the two screws, and
remove the Suction Fan.
B) Silver M3x40 screw: 2 pcs
Install the Suction Fan with its duct part in contact with the dowel
of the frame.
Duct part
Dowel
SE Group Confidential (Related Staff Only)
Revision B
Suction Fan
s
222