Epson SC-F9200 Series Service Manual page 324

SC-F9200 Series
Dual Head #1
1 2 3 4 5 6 7 8 9
Figure 4-47. Adjustment Pattern
9. On the control panel, set [2.0] in
10. On the control panel, set [0.2mm] in
adjustment pattern will be printed.
11. Repeat adjustment until the number of the pattern with least visible lines falls
between 2 through 8.
12. Click [OK] on the POPUP screen of the service program.

C H E C K
By clicking the [OK] button on the program, the adjusted
P O I N T
results are also applied to media 1-30.

The setting value for PG2.5 is automatically calculated.
ADJUSTMENT
NG OK NG
Dual Head #2
1 2 3 4 5 6 7 8 9
Platen Gap.
Head Alignment. and then press [OK], the
Head Related Checks and Adjustments
SE Group Confidential (Related Staff Only)
Revision C
324