Epson SC-F9200 Series Service Manual page 164

SC-F9200 Series
3.4.5.11 CR HP Sensor
Regarding to SC-F9200 series, there are 2 types of the printers;
C H E C K
P O I N T
One is the printer which have films to extend life and the Other is
the printer which don't have films not to extend life.
Make sure that how many labels the printer has by opening Left
Upper Cover like .
 Printers which have films to extend life:There are 2 labels.
 Printer which don't have films not to extend life:There are 1 label.
Printers which have films to
extend life:there are 2 labels
Figure 3-103. How to confirm the printer type for SC-F9200 series
1. Unlock the CR Unit. (p98)
2. Remove the Media Loading Lever.
3. Remove the Right Upper Cover.
4. Move the CR Unit until to a position over the platen.
At the next step, be careful not to damage the hooks of the CR HP
C A U T I O N
Sensor as they are very thin.
5. Disengage the hooks, and remove the CR HP Sensor.
DISASSEMBLY & ASSEMBLY
Printers which don't have films not
to extend life:there are 1 label.
(p210)
(p103)
Disassembly and Assembly Procedure
6. Disconnect the cable from the CR HP Sensor
- Rear side -
CR HP Sensor
Figure 3-104. Removing the CR HP Sensor
SE Group Confidential (Related Staff Only)
Revision B
.
Hooks
Cable
164