Epson SC-F9200 Series Service Manual page 198

SC-F9200 Series

When installing the Ink Tubes, confirm that there is no torsion
of the Ink Tubes. (See

When installing the joint, insert the dowel into the positioning
hole.

Secure the screws that secure the Ink Supply Tube with
tightening torque about 0.29 ± 0.05 Nm.

Before attaching the Joint Rubbers, let them get wet with
cleaning liquid (CL14).

Confirm there are no foreign objects attached on the Joint
Rubbers.

If the Joint Rubbers are deformed, restore it to its original
shape manually.
DISASSEMBLY & ASSEMBLY
)
Figure3-142
Positioning hole
and dowel
Disassembly and Assembly Procedure
Before installing the new Ink Tube, be careful of the following
points.

Loosen the two each screws of the joints, and remove the tubes.

Since ink still remains in the removed tube, make sure to
dispose of it according to local regulations.
Joints and screws
Tube
Tube
SE Group Confidential (Related Staff Only)
Revision B
Ink Tube
Joints and screws
198