Epson SC-F9200 Series Service Manual page 242

SC-F9200 Series
8. Remove the two Compound Gears.
Be careful not to damage the encoder and scale of the ATC Motor
C A U T I O N
in the next step.
Scale
Encoder
9. Remove the two screws, and remove the ATC Motor.
B) Silver M3x6 S-tite screw with built-in washer: 2 pcs
Make sure to install the ATC Motor in the correct orientation
checking the connector position.
DISASSEMBLY & ASSEMBLY
ATC Motor
Connector
Disassembly and Assembly Procedure
Compound Gears
Figure 3-197. Removing the Compound Gears
ATC Motor
B
B
Figure 3-198. Removing the ATC Motor
SE Group Confidential (Related Staff Only)
Revision B
242