SC-F9200 Series
3.
Select
Head ID
Input.
Input the head rank ID and press the
Figure 3-84. [Head ID Input] screen
4.
Turn off the printer. (Make sure to turn off the printer to enable the head ID
setting.)
5.
Turn on the printer.
6.
Select [0 RIP Settings] from the control panel.
Media Setup
Select Media
7.
Load a media for adjustment (Premium Glossy Photo Paper (250) 24 inch length
or longer).
DISASSEMBLY & ASSEMBLY
[Write]
button.
(p309)
0 RIP Settings
Disassembly and Assembly Procedure
8.
Select Cleaning.
Select
CL3
and all channels and press the
Figure 3-85. [Cleaning] screen
9.
Run the nozzle check from the control panel or from the service program (p311).
10. Perform the Head Inclination Manual Adjustment (CR direction).
11. Perform the Head Slant Auto Adjustment (PF direction).
12. Turn off the printer.
13. Perform the PG adjustment.
(p306)
14. Turn on the printer.
15. Perform the Manual Adjustment for Data Shift.
16. Perform the Manual Uni-d Adjustment for Between 2pcs heads.
17. Perform the Manual Uni-D Adjustment.
18. Perform the Manual Bi-D Adjustment.
SE Group Confidential (Related Staff Only)
Revision B
[Run]
button to perform CL3.
(p314)
(p319)
(p321)
(p323)
(p325)
(p327)
148