SC-S30600 Series
4.10.6 Auto Uni-D Adjustment
PAPER USED
Size: 16 inch length or longer
Type: 3M IJ40-10R
EXECUTION MODE
Normal Mode
PROCEDURE
1.
Load the paper in the printer.
2.
Turn the printer ON.
3.
Start the Service Program and select
4.
Click [Run].
The adjustment pattern will be printed.
Figure 4-24. [Auto Uni-d adjustment] Screen
ADJUSTMENT
Auto Uni-d
adjustment.
CR Related Adjustments
5.
After the pattern is printed, the printer will automatically scan the pattern and carry
out the adjustment (no manual adjustment is needed).
6.
Click [Finish].
7.
Turn the printer OFF to finish the adjustment.
Figure 4-25. Adjustment Pattern
Revision B
241
Confidential