Epson SC-F9200 Series Service Manual page 31

SC-F9200 Series
Menu
Media End Check
Media Skew Check
Media End Option
Print Nozzle Pattern
Printer Setup
Periodical Cleaning
Cleaning Cycle
PRODUCT DESCRIPTION
Table 1-17.
Menu Item/Setting Values (shaded one is the default)
ON
OFF
ON
OFF
Continue
Stop Printing
OFF
1 to 10 pages
Off
Light
1 - 240 hours
Off
Medium
1 - 240 hours
Off
Heavy
1 - 240 hours
Off
Power
1 - 240 hours
OFF
to 10 pages
Control Panel
Setup Menu
Selects [On] to detect the media end or [Off] to set it to off.
Select [Off] and print when Media Out error is displayed even
though the media is set correctly. Setting to [On] is
recommended usually.
Selects [On] to stop printing and display an error on the control
panel screen when the set media is skewed, or [Off] to continue
to print. The skewed media causes media jam, so setting to [On]
is recommended usually.
Select whether or not (Continue/Stop Printing) to print the
remaining data after replacement.
Selects the execution timing for the periodical check pattern
printing from [Off] or one of the values between per [1] page to
per [10] pages. When this is set to [Off], the periodical check
pattern printing is not executed. When one of the values
between per [1] page to per [10] pages is selected, the check
pattern is printed on the top of the set page. Allows you to judge
whether any clogging can be seen in the following printing by
checking the check patterns later on.
Selects the execution timing for periodical head cleaning from
[Off] or once per [1] hour to per [240] hours. When this is set to
[Off], Periodical Cleaning is not executed. When one of the
values between per [1] hour to per [240] hours is selected, head
cleaning is performed automatically when the set time has
passed. If the set time has come when the printer is printing or
in the sleep mode, Periodical Cleaning is performed after
finishing the job or mode. In addition, the time counter is
cleared in the timings listed below.

When the set value of this setting is changed.

When All Nozzles Cleaning is performed manually.
Selects the execution timing for the periodical head cleaning
from [Off] or one of the values between per [1] page to per [10]
pages. When this is set to [Off], Periodical Cleaning is not
executed. When one of the values between per [1] page to per
[10] pages is selected, head cleaning is performed automatically
before printing the set page.
Explanation
SE Group Confidential (Related Staff Only)
Revision C
31