Epson SC-F9200 Series Service Manual page 245

SC-F9200 Series
3.4.9.2 Reel Unit
1. Remove the nine screws, and remove the Reel Unit.
A) Special screw: 9 pcs
When installing the Reel Unit, confirm the following.

On the left side of the Reel Unit, insert the dowel of the frame
into the positioning hole on the Reel Unit.

On the right side of the Reel Unit, insert the dowels of the frame
into the positioning grooves of the Reel Unit.
DISASSEMBLY & ASSEMBLY
A
Disassembly and Assembly Procedure
- Outside -
Positioning hole and dowel
A
A
- Inside -
A
A
Reel Unit
Figure 3-200. Removing the Reel Unit (SC-F7100 Series)
SE Group Confidential (Related Staff Only)
Revision B
Dowel and positioning groove
A
A
Dowel and positioning groove
A
A
245