SC-F9200 Series
4.11.6 Head Slant Auto Adjustment (PF direction)
PAPER USED
Size: 24 inch length or longer
Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
1.
Load the paper into the printer.
2.
Turn the printer ON.
3.
From the panel menu, select the
Media Setup
to
RIP Setting
"0".
4.
Start the Service Program and select
5.
Click [Run]. The adjustment pattern is printed.
6.
The printed pattern is scanned by the Ink Mark Sensor and the required adjustment
level (how much the Adjustment Knob should be moved) is displayed.
7.
When the adjustment is necessary, click [OK]. The CR Unit moves to the
adjustment position.
ADJUSTMENT
menu, and change the
Select Media
Head slant auto adjustment (PF
direction).
Head Related Checks and Adjustments
Prints the pattern
Reading and judging
Adjustment is not necessary
Figure 4-40. [Head slant auto adjustment (PF direction)] Screen
SE Group Confidential (Related Staff Only)
Revision C
Adjustment is necessary
319